Curtain rings with brackets - how to use them correctly

instagram viewer

Curtain rings with clips are not only practical, they also make your work easier. Because not only hanging up, but also hanging down the curtains is very easy thanks to these rings.

Curtain rings are practical helpers.
Curtain rings are practical helpers.

What you need:

  • Curtain rod
  • Curtain rings
  • Curtains

If you use curtain rings with clamps, you no longer have to thread curtain rolls and you can get to work quickly.

How to use the curtain rings

  1. So that you can hang up your curtains with curtain rings in the future, you will of course need a curtain rod. You can get these in all conceivable sizes at the hardware store and then attach them over the window.
  2. The curtain rings can then simply be pushed over the curtain rod and the hooks for the curtains can be attached to them.
  3. If you now want to change or wash your curtains, you will have all the curtain rings in no time taken off the peg and don't have to laboriously stretch as before to close the curtains switch.

The clips for the curtain rings

  1. In order for your curtains to hang securely, you must first attach the brackets to the curtain at regular intervals.
    2. Hang up the curtain with a clamp rod - you should pay attention to this

    In case you want to put up a curtain without drilling holes ...

  2. Then you attach each clamp to a curtain ring and you can then hang the curtains securely.
  3. Also hanging is very easy with this method, you only have to loosen the curtain rod from the holder on one side and then remove all rings at once.
  4. If you want to wash the curtains now, just take off the clips on the curtain and leave the curtain rings connected to the clips.
  5. Now you just attach the clips to a new curtain and then you can simply slide the rings over the curtain rod again and hang up the curtains with one hand movement.

Clean the curtain rings and curtain rod

  1. If you also want to clean the rods and the rings at the same time, then just leave the curtain rings all down, remove the clips and remove each curtain ring with a damp cloth wipe off.
  2. Then take the curtain rod out of the holder and clean it with a damp cloth.
  3. When everything is clean, first tighten the clamps on the curtain rings again and then on the curtain.

The laborious threading of the many individual rolls is no longer necessary if you use the practical curtain rods and the matching curtain rings.

How helpful do you find this article?

click fraud protection