Assemble the Hülsta Lilac showcase yourself

Hülsta - brand for fine and high-priced furniture

• Anyone who knows the Hülsta brand knows that it is furniture are not among the cheapest, but are also of excellent quality. In addition to young living room furniture, the Lilac furniture line also offers a dining room program with a showcase.

• The Hülsta Lilac showcase is available in high-gloss black and high-gloss white combined with walnut, depending on the colors in which you want your furnishings. The paint is a high-quality, extremely shock-resistant paint, the production of which has its price.

This is how you assemble your Lilac showcase yourself

If for whatever reason you no longer have assembly instructions, you can get them either from the manufacturer itself or from a furniture store that carries this line. It can be a bit difficult, however, because the manufacturer or the furniture store usually wants to offer a set-up service.

• However, the Lilac showcase from Hülsta is not a particularly large or complicated piece of furniture, so you can dare to assemble it with a little manual skill. With the dimensions 206.6 x 55 x 45.8 cm, the piece of furniture is rather small and handy.

• The body of the showcase consists of a continuous door that is high-gloss lacquered above and below and has a glass element in the middle; the handle is embedded in the clear glass as a recess and is hardly visible, so you don't have to mount anything here. The back wall is off wood and has beads for admitting the side wall, which in this case is the door.


Hülsta Alana - overview

If you value high quality furniture and at the same time your room ...

• The back wall is made of wood with a walnut look, and you also have two wooden shelves. If necessary, you also have lighting, the cables of which you have to lay hidden. First put the parts together as a test so that everything fits.

• Make sure there is enough space for assembly and lay out all parts clearly visible - including the tools. Usually you will need a screwdriver for the hinges and the connection of the wooden elements. Put a soft ceiling to the Assembly underneath, so that a high-gloss surface cannot get scratched.

• Have another person hold the back wall for you while you insert the wood connectors into the holes provided and screw them tight. Make sure that you do not tighten a screw all the way, leave a little play on all of them, because then you can still fine-tune. The pins are inserted into the center opening and then tightened sideways. Make sure that the wooden connectors snap into the openings.

• The stainless steel base on which the construction is screwed is not visible when the Doors are appropriate. Here it is important that you adjust the door hinges precisely so that nothing is warped. This requires the most patience when setting up. The door must be exactly in the middle, otherwise the spring-loaded lock will not work. The doors close without large joints when you are exactly in balance.

• Simply place the shelves in the recesses provided. This is not visible from the outside, it looks like it was made from one piece. In the end, thanks to a sophisticated system, you can no longer see any connections or screws. If you have chosen lighting, you should pull the cables through the holes provided, because you should not see anything from the outside at the end.