CNC plasma cutter Use for DIY

General information about the CNC plasma cutter

The CNC plasma cutter has various functions and can be used in many ways. It is mainly suitable for plasma cutting, but can also wood, PVC and other materials, easily mill.

• The maximum driving speed is approx. 2.5 meters per minute. This time specification applies to all materials that can be cut and for all thicknesses up to 16 mm. The numerous support plates are corrugated and of course interchangeable.
• The support surface is 1650 x 1200 mm. There are two different trolleys, which relate on the one hand to plasma operation and on the other hand to milling operation. Both functions can also be used in parallel. This is why the CNC plasma cutter is so popular and can also be used by yourself.

All machines that are used in self-construction can be used in a variety of ways, as the devices are easy to understand and can be used well for home work.

Tips for building your own

With the help of the CNC plasma cutter, some DIY work can be carried out very easily. Both the cutting and the milling of various materials are easy and convenient.

• Please note that the device can only process thicknesses up to 16 mm without any problems. A lower thickness can always be an advantage here, because the thinner the material, the easier it is to get through. For higher strengths, consider using a torch cutter that can cut and mill thicker metals.
• Always wear protective clothing when using the CNC plasma cutter and always be vigilant when using it, as there is an increased risk of injury.
• Using this device, you can mill or cut grooves, holes and other devices in your material. Draw the interfaces exactly beforehand so that you can work precisely and precisely. You can also set the cutting and milling paths to the millimeter and control them manually by hand. The use in self-construction is therefore easily possible and simple.