Build shelves for beverage crates yourself

instagram viewer

You can only really get hold of bottles that you want to remove from beverage crates if you design stacking devices for the crates. These devices should be created in the form of shelves. Shelves are easy to build and easy to assemble.

Build sturdy shelves for your beverage crates

You should build shelves for the multitude of beverage crates that occur in every household. We all know the problem with the empty crates. If you put them next to each other, you will take up so much space in the pantry that you can hardly put other things in it. If you stack the crates, you can only get to the crates by rearranging them. So shelves are the optimal solution.

  1. Use the cordless screwdriver to screw the board blockboard 500 x 40 x 19 mm flat to the edges of the board block board 500 x 320 x 19 mm. The 500 mm long sides lie on top of one another and one side of the narrow board must be flush. This creates 3 angled shelves.
  2. Make markings on the inside of the two boards of blockboard 1200 x 400 x 19 mm. On the front edges of the boards, draw the markings at 30 mm, 530 mm and 1030 mm, measured from below. On the rear edges of the boards, mark the boards at 180 mm, 680 mm and 1180 mm from below.
  3. Connect the marks 30 mm and 180 mm, 530 and 680 mm and the marks 1030 mm and 1180 mm with each other with pencil lines. In the middle of these lines you draw the distances of 320 mm. This is the measure of the shelf depth.

One shelf is sufficient for three crates of drinks

  1. Hold the shelves with the bottom surfaces on the marked routes and screw them to the large outer boards. The side with the angled strips comes to the front of the shelf so that the inclined beverage crates will later stand securely on the shelves.
    2. A loft bed as a knight's castle - this is how you build it yourself

    A loft bed that looks like a knight's castle is something special. If you give your ...

  2. paint Now cover the wooden structure with clear varnish.
  3. After the paint has dried, screw the empty container stand to the wall using an angle and dowel. This is important so that the device for the boxes cannot tip over.

The shelves are ready. Now you can store your beverage crates in a space-saving manner and still remove the bottles without any problems.

click fraud protection