Build a beach chair without a blueprint

What you need:

• 2 wooden panels for the side wall 2.00x1.00 m
• 1 wooden plate 175x80 cm (rear wall)
• 2 wooden panels 98x80 (seat and intermediate shelf)
• 1 wooden plate 48x80 (front panel)
• 1 cover for the footrest 30x74 cm
• Wood screws
• 4 square timbers
• 6 strips for the seat and the intermediate floor, 60x4x4cm
• 20 strips for the roof 84x3x2 cm
• Piano band

The summer beach feeling can easily be brought into your own garden with a self-made beach chair. You can put the project into practice even without a complex construction plan.

Get the material for your beach chair

• First you get the "ingredients" for your new beach chair without a special blueprint. So that you can enjoy it for a long time, it should be reasonably stable.
• So you buy two wooden panels, each 200 x 100 cm in size, for the side walls of your beach chair in the hardware store. Here you can saw in the curves for the upper edges, approx. starting at 175 cm. That saves you time.
  instagram viewer
• For the back wall, get a wooden panel measuring 175 cm x 80 cm.

Now start building without a blueprint

1. You simply screw the side walls to the above-mentioned rear wall using wood screws. It is best to pre-drill the holes here. This way the panels don't tear.


Blueprint - you build a duck house like this

To create a nice retreat for your feathered friends, you can use a ...

2. Then screw square pieces of wood to the side walls. You will use this later as an intermediate floor and as a seat.
3. You mount strips at a height of 44 cm for your seat. The height ends here at 48 cm.
4. For the intermediate shelves, screw 3 strips - 26 cm high - with the catch strips described above.
5. Now that happens Assembly the intermediate floor and then the seat. This will help you stabilize the beach chair. You can do this even without building instructions.
6. Next, attach the seat. For this you use a so-called piano hinge, which you attach to the support bar directly on the back wall of the beach chair.
7. In the resulting storage compartment you bring z. B. cushions and cushions underneath on bad weather days.
8. Now you are making the footrest. To do this, screw a wooden plate of 74 x 60 cm onto another plate of 30 x 74 cm. A 50 x 10 cm plate attached to the back serves as a base, which you screw on there.
9. You can get a handle through a hole in the cover of your footrest.
10. In another wooden board measuring 48 x 80 cm, cut an area of ​​30x74 cm in the middle. You can then slide your footrest through this cutout. You screw this wooden plate to your beach chair as a cover.
11. Finally, assemble your roof. For this you use conductors with a thickness of 3 x 2 cm, which you nail to the beach chair side walls. If you want, you can give your beach chair a coat of paint of your choice without a special construction plan.