Lower chlorine in the pool
Are you happy every day when your children splash around in the pool? But how quickly the joy is over when the chlorine level in the pool is too high. The children want to bathe and moan. Good advice is valuable now. How is the chlorine in the pool reduced quickly?
What you need:
- chlorine
- Water testing device or test strips
How to lower the chlorine level in the pool
- As the pool owner, you are also responsible for looking after and maintaining your jewelry. An effective chemical pool water treatment is based on the correct setting of two important parameters. This is on the one hand the pH value and on the other hand the disinfectant content. Usually chlorine is used as a disinfectant. Therefore, you should analyze the water at least once a week. The values are measured regularly with a test device or water test device. This is the basic requirement for clear Pool water.
- Measure the chlorine content of your water with an existing measuring device (digital test strip reader or DPD water tester). An optimal chlorine value in the pool is 0.5 to 1.0 mg / l. If the chlorine value is too high, there is no reason to panic. In hot weather and correspondingly heavy use of the pool, the chlorine content falls by itself. Theoretically, you could neutralize the chlorine with sodium thiosulphate in a ratio of about 1: 2. But use chemistry against chemistry?
- It is more advisable to drain some of the pool water in the event of extreme overchlorination. Then let off some fresh water. Attention: Note the fill level! Now test the chlorine content again and possibly re-chlorinate.
Important! For hygienic reasons, the use of chlorine is indispensable for unadulterated bathing fun. However, conscientious handling and the use of explicit long-term chlorine preparations for a continuous chlorine value and thus the best water quality is essential.
How helpful do you find this article?
