IPad 1: swap display
In the event of damage to the iPad 1's display, the first and foremost issue is of course The decisive question is where you can get spare parts and carry out the repairs yourself will? There are a wide variety of options for having the display exchanged. First and foremost, a request is made Particularly helpful from the manufacturer Apple, but the Internet also offers some good alternatives for purchasing a new one Displays.
A broken or damaged Display Replacing an iPad often seems complicated and impossible for the inexperienced. However, this process is often not as difficult as it seems. How to do it, a iPad-1 display and what things are required for this are briefly explained in the following sections.
Replace the display if an iPad 1 is damaged
- There are various options for exchanging displays; Probably the simplest method would be to leave the iPad in the care of a specialist workshop, the best here, of course, directly from the manufacturer Apple, in order to have it professionally repaired by a competent partner permit.
- With a little manual skill and the right spare part, this can also be replaced yourself, and how this works is shown in a brief summary that follows.
The replacement of the defective display
There Apple Has paid attention to a simplified design during the construction, a defective display can be replaced in just a few simple steps. A spare part is easy to get from one of the numerous online spare parts shops. Since this has not been firmly integrated into the housing, it can be exchanged without any problems; in principle, only very few manipulations are required and can easily be carried out by anyone.
- First of all, you have to carefully detach the front cover from the device with a knife or similar tool.
- Next, you can now easily remove the glass display. Make sure that the front cover is connected to the WiFi antennas, i.e. the front frame cannot be completely removed, but can only be opened.
- Now take the new display out of the packaging, remove the protective film and carefully insert it into the device.
- Finally, close the front cover again and make sure that all clip pins click into place so that it doesn't accidentally fall off again.
If you have an Apple iPad and the device no longer works properly, you can ...
You can also find a complete display replacement process on YouTube under the keywords "iPad 1 display replacement". However, if you replace a display yourself, the guarantee is of course lost, which should definitely be taken into account.
