Remove the rubberized floor and adhesive residue

instagram viewer

A rubberized carpet that has been glued can hardly be completely removed without problems. Most of the time, stubborn adhesive residues remain or the surface is scratched. But with special equipment and a lot of patience, you can do it.

Glued floors can hardly be removed.
Glued floors can hardly be removed.

What you need:

  • Carpet strippers
  • ear protection
  • Petroleum ether
  • Rag
  • Plastic spatula
  • Floor care

Remove rubberized carpets from the sub-floor

If you have glued a carpet with a rubberized underside, there are several factors that matter:

  • Rubberized carpeting on hard floors, like wood, Tiles or screed can usually be removed without leaving any residue. The rubber residue from the carpet can be removed together with the adhesive residue with a carpet stripper. the devices can be rented at the hardware store. Wear hearing protection when working. Caution: tiles can break in the process, real wooden floors usually have to be refurbished afterwards.
  • With laminate floors you have almost no chance of removing the adhesive residue and the rubber residue in such a way that you can Laminate can use again, the decorated layer of the laminate is just too thin.
  • With PVC floors, you can be lucky with the stripper, but the risk of scratching the floor is high. But other methods are usually not safe for the subsurface either. Perhaps you will try it out on a corner.

Overall, rubberized carpeting and adhesive residues are difficult to remove, and the risk to the sub-floor is great.

Remove PVC tiles

If PVC tiles have been laid on a floor, it can be difficult to ...

Another method of removing gum and glue residue

The following method is significantly more difficult than with the stripper:

  1. Rub a small part of the floor to which the remains of rubberized carpets and glue residues adhere with benzine. Make sure there is good ventilation, do not smoke while working, and do not make a fire. Avoid sparks of any kind.
  2. Now use a plastic spatula to lift off the glue residue and the rubber coating. Dispose You this. Caution, the residues are easily combustible due to the gasoline. It is best to take them outdoors immediately.
  3. When you have one vacancy, work on the next one until the entire floor has been freed from glue residue and carpet residue. Rubberized floor is difficult to remove.
  4. Thoroughly clean the floor. The remains of the rubberized floor are now gone, but there is often still a thin film of the adhesive residue left over. If the floor feels sticky, wipe it again with gasoline.
  5. The floor is still sticky afterwards but otherwise smooth and without scratch, apply a care product suitable for the floor. The thin layer of wax usually compensates for the stickiness of the glue residue.

How helpful do you find this article?

click fraud protection