Replace the rubber spacer on the glass table
If there is a glass table under your furniture and you want to replace its rubber spacers, there are a few things to keep in mind as you go through the process.
What you need:
- ceiling
- Mineral spirits
Rubber spacers come in different designs and over time they should certainly be replaced. Because the more load the glass table has to bear, the lower the distance between the glass plate and Undergroundso that the spacers should be replaced when they no longer return to their flexible original position.
Replace the rubber spacers on the glass table
- If you want to renew your rubber spacers, you will find various different models in the hardware store. If the glass plate of your glass table is quite thin, you can use thinner rubber spacers. However, if it is a thick glass plate with a higher weight, the rubber spacers should be several millimeters, as they ultimately have to carry a higher load. On the one hand, there are rubber spacers for glass tables as washers with holes in various sizes available, but on the other hand you also have the option of closed washers acquire.
- To remove the old rubber standoffs, you must first remove the glass top from your glass table. It is recommended that someone else is there to help you, because you would be not the first person to slip a pane of glass and then shatter it into countless pieces splintered.
- So that the glass plate does not get any scratches or small cracks, you should place it on a ceiling place. It is better to lay it down, otherwise it may slip away if you have positioned it upright.
- If you have previously used adhesive spacers, carefully remove them from the surface and clean the corresponding area with benzine, if the material allows it.
- Are all adhesive residues from the old spacers made of rubber or various other materials (for example Teflon or felt) has been removed, then you can place the new holder for your glass table on the cleaned area attach. If your glass top of the table is held in place with suction cups before it slips, you can You simply place it on the surface and then briefly press it down so that it fixes are. Use a spirit level to check whether the glass plate will then also lie horizontally.
- In the last step, you finally place the glass plate back on the rubber spacers so that your glass table can carry all the loads again.
Buying a glass top for a table - what you should pay attention to
Glass tables are very popular in many households. Not everyone wants ...
How helpful do you find this article?
