Assembly instructions for the window opener FH70

instagram viewer

The FH70 window opener has been optimized for use on a greenhouse. The opening works automatically. You can also install the opener later. Assembly instructions are included with the product.

The FH70 window opener offers electronic opening and closing of windows such as those used in a greenhouse. You can use this window opener at building of the greenhouse or retrofit. The use of such an electronic model is recommended to automatically regulate the temperature inside the greenhouse. The window opener is supplied with assembly instructions.

The FH70 window opener is easy to use

  • Of the Window opener FH70 is manufactured and sold by the Einhell company. It works fully automatically. This means that the controlled roof window is opened and closed automatically. The window opener reacts to changes in temperature. It works in a range from 13 to 34 ° C and lifts windows that weigh up to seven kilograms.
  • You have the option of determining the opening angle of the window. This can be defined continuously. Whenever the temperature changes, the window opens or closes, depending on which type of regulation is necessary.

The product is easy to install with the assembly instructions

The window opener is supplied with assembly instructions when you buy a new one. However, the instructions are sometimes described as difficult to understand. The window regulator is delivered partially assembled and only two holes are required Included in delivery and you do not have to make a power connection, because the window opener works pneumatically with a Feather.

  1. The window regulator is supplied with a bracket and the associated fastening material. To integrate this into the frame of the greenhouse, you must first drill two small holes in the lower center of the frame of the greenhouse window.
    2. Mount the wall-hung toilet - this is how it works

    The counterpart to a standing toilet is the wall-mounted or Wall-mounted toilet. In order to …

  2. Mount half of the window opener FH 70 on the greenhouse window frame to which the pneumatic cylinder is attached.
  3. Hold the bracket against the window to determine the correct distance for attaching the other moving part of the window opener. Drill the holes and screw the bracket onto the greenhouse window.
  4. Then the window opener is connected to the greenhouse window with two screws and properly tightened. The automatic window opener is now ready for use.
  5. Set the window opener according to the ambient temperature. You should devote time to fine-tuning, especially if you are still inexperienced. To begin with, use a thermometer to check the temperature.

Make sure that you unscrew the cylinder in the cooler season, because the window opener should not be used at low temperatures.

click fraud protection