Retrofitting an external roller shutter - you should pay attention to this

instagram viewer

Retrofitting an external roller shutter is expensive, but still makes sense. Because roller shutters not only protect your premises from burglars, but also from cooling down or excessive sunlight. They also provide valuable services when it comes to thermal insulation.

Choose the right external roller shutter.
Choose the right external roller shutter.

What you need:

  • Roller shutters as a prefabricated kit
  • drilling machine
  • drill
  • Cordless screwdriver
  • Spirit level
  • Folding rule
  • pencil
  • ladder
  • hammer
  • Hacksaw
  • Screws
  • Dowels

Subsequent installation of a window protection

Basically there is the possibility of retrofitting an external roller shutter. You can use a top-mounted or front-mounted roller shutter for this. Which roller shutter box for yours window is best suited depends on the individual architectural conditions and the type of use.

  • You can therefore choose a suitable roller shutter from various types of external roller shutters, depending on your personal installation situation. If necessary, seek advice from your specialist retailer.
  • A top roller shutter is not necessarily recommended for subsequent installation, as the window would have to be removed in order to pry open the upper lintel. Recessed mounting is more suitable in connection with conversion dimensions.
  • The front roller shutter, on the other hand, is mounted directly in front of or in the window reveal and is therefore ideally suited for subsequent installation.

Install an external roller shutter

A front-mounted roller shutter is primarily suitable for retrofitting an external roller shutter.

Retrofitting external roller shutters - this is how it works

There are still numerous houses that do not have shutters installed. Especially on ...

  1. First of all, determine the correct size for your external roller shutter. For the width, measure the outside dimension of the window. The dimension for the height depends on whether you mount the front-mounted roller shutter on the frame or on the masonry.
  2. Even if you want to assemble your external roller shutter yourself, you need the help of a second person.
  3. Mount the roller shutter on the outside of the house in front of the reveal of the window. In order not to impair the thermal insulation, you can also mount the roller shutter in the window reveal, provided that the necessary space is available.
  4. Attach the guide rails to the roller shutter box.
  5. Now place the frame exactly where it is to be installed later and align it horizontally and vertically using the spirit level.
  6. Mark the drill holes with a pen.
  7. Pre-drill the holes and insert the dowels in them.
  8. Use the special screws included in the kit to assemble the frame now.
  9. Then attach the cover of the external roller blind.
  10. Depending on whether your roller shutter has a motor or a belt pull, install the corresponding control element according to the manufacturer's instructions.

How helpful do you find this article?

click fraud protection