Design a magnetic wall creatively with magnetic paint
As if by magic, magnets adhere to a wall that is no different from the other walls in the apartment. Nobody knows that it was previously treated with magnetic paint. Children in particular find this phenomenon very fascinating, and it is very easy to implement.
What you need:
- Magnetic paint
- Brush and / or roller
- Possibly. wallpaper
- Possibly. Body color
Implement creative ideas with magnetic paint
- Magnetic paint is relatively easy to use because it is a conventional emulsion paint to which iron particles have been added. The interior paint can be applied to all smooth surfaces, whether in kitchen, Bathroom or children's room.
- With a top coat you can hide the magnetic paint and design the magnetic wall exactly how you want it. Even wallpapering over is possible.
- If you paint over the magnetic surface with blackboard paint, you kill two birds with one stone, because the magnetic board can also be written on with chalk.
Painting with the magnetic paint
- First of all, the Underground be prepared for the new coat of paint. It must be dry, free of grease and dust. Remove any loose parts such as flaky paint. You can remove them with water and a brush. After that, however, you have to give yourself the time to let the wall dry out properly.
- For the best result, fill in all cracks and holes and sand the uneven areas in front of the Apply paint, because this creates the smoothest possible surface - the basic requirement for a good one Work result.
- If you want to remove the magnetic paint later without leaving any residue, apply it to a smooth wallpaper that you can easily peel off again. Cheap woodchip wallpaper is also suitable for this. You should prime particularly absorbent substrates with deep primer or thinned paint.
- The magnetic paint itself must not be diluted, i.e. you must not mix it with other colors.
- Like any other color, magnetic paint must also be used before To brush be stirred thoroughly. In this way, the iron particles that are deposited in the lower area of the can are evenly distributed again.
- Apply the paint with a brush and / or roller. The magnetic effect is only slightly pronounced in one layer, so you should apply several layers of paint and let them dry again and again in between.
- The drying time before further processing is around 40 hours at 20 degrees Celsius room temperature.
- After 24 hours, a beautifying top coat of wall paint or varnish can also be applied. For example, you can “hide” the magnetic part of the wall under the normal wall color so that only insiders know about the magnetic properties.
- Use latex paint or Acrylic varnish when you need a sturdy magnetic board.
Redesign kitchen fronts - this is how it works with paints and varnishes
Perhaps you are one of those people who have a ...
How helpful do you find this article?
