Correctly regulate the thermostat for the underfloor heating
Underfloor heating not only ensures warm feet, but also a pleasant, constant temperature throughout the room. To do this, you need a thermostat with a temperature controller. You can find out how to properly regulate the thermostat for underfloor heating below.
The control of the underfloor heating depends on your living conditions. Is the underfloor heating in the Home without additional radiators, a boiler control is sufficient. In rented apartments with different types of heating, the underfloor heating requires a separate heating circuit with mixer.
Set the thermostat for the underfloor heating precisely
Basically, different outside temperatures influence the level of temperature output from the control to the heating circuit of the underfloor heating. The lower the outside temperature, the higher the control outputs the temperature to the heating circuit.
- The control for the heating circuit with mixer must be set precisely so that the room temperature is always constant, regardless of the outside temperatures.
- The controller needs two temperature sensors for this. One for the outside temperature and a thermostat with temperature sensor for setting the room temperature.
- In order for the room temperature to maintain the set value regardless of the outside temperature, the heating curve on the control with thermostat must be correctly set.
- A heating company can do this for you. If you have sufficient technical understanding, you can also vote for the underfloor heating yourself.
- This is a lengthy process where you have to wait and see cold and warm outside temperatures then correct the slope of the heating curve so that the room temperature is always the same remain.
- Once this has been done, all you need to do is set the room thermostat to the desired room temperature.
- The room temperature is then constantly regulated by the underfloor heating control.
- In summary, this means that a thermostat with control keeps the desired temperature of the underfloor heating constant by matching the room temperature with the outside temperature.
Modern gas heating systems are usually controlled by various thermostats. The …
A thermostat with control is the most precise solution for regulating your underfloor heating, because with simple thermostats without control often result in annoying deviations from the Desired temperature.
How helpful do you find this article?
