Landlust angel made of wood

instagram viewer

Especially at Christmas time, if you take a closer look, you can see a lot of Landlust angels made of wood at the entrances of the respective apartments. These small decorative parts are actually quick to make and don't really require any special instructions. You can't really go wrong with a few parts.

Make individual parts for a Landlust angel

Since you are your Landlust angel wood If you want to set it up on your outside staircase, in addition to the building materials you also need to get something to seal. In order to get your staircase ready without instructions, you should perhaps first pay a visit to your trusted hardware store. Then you should find a large block of wood to use as a base material.

  1. For your Landlust angel made of wood, you first have to find a block that you can split with a hatchet. This log should be cut from the trunk of an oak. In terms of diameter, it would be good if the block were not less than 20 cm.
  2. The height is up to you, but should not be less than 30 cm. When you have found the right block, split it into four quarters with a few strong strokes of the ax.
  3. You then have the opportunity to choose the most beautiful block. Since you are working without instructions, you have no special requirements in terms of appearance. The raw material should look like a triangle, one side of which is semicircular.
  4. Since there should still be tree bark on the semicircular side, you can remove it first before you go to the next construction phase.
    5. Build your own wooden drawer box - instructions

    A useful office helper when it comes to getting your papers tidy is ...

Process the wood further without instructions

  1. After you have freed the quarter log from the tree bark, you should coat the oak wood with a thin layer of clear lacquer and set it aside for the time being. Then look for a small picture template for your Landlust angel on the Internet and print it out. You will need this picture template to transfer the small wings onto a thin sheet of pressed wood using tracing paper.
  2. After you've drawn up the matching wings, cut out the wings. Then paint the cut-out wings with clear varnish and glue them to the semicircular side of the quarter block after drying.
  3. When that is done, all you need to complete your Landlust-Angel is a head that you can make from a golf ball. Since you're working without guidance, a mini golf ball can do the same. Then, with a pencil, draw a little halo on the ball.
  4. A roofer's nail, which you hammer into the top of the quarter block, serves as a small neck in such a way that you then glue the golf ball to the flat side of the nail with superglue can.

In order to visually enhance your staircase figure, you can of course also paint the small wings in the color of your choice.

click fraud protection