Seal joints in the bathroom
Do you want to have a nice bathroom? Then you should also pay attention to the joints. You can seal these quickly and easily with silicone.
Seal joints in the bathroom with silicone
Do you have Tiles in the bath, over time you will find that the silicone in the individual Put peeling off or discolored. These signs of wear and tear occur particularly on the edge of the tub, shower or wash basin. However, you can fix this unsightly appearance very quickly if you seal the joints.
- Buy silicone in a gun at a hardware store, as this makes sealing easier, and enough masking tape on a roll. You should use special sanitary silicone for the bathroom, as it is geared towards the often damp conditions in the bathroom. If you don't have a spatula and water atomizer on hand, you can also get them at the hardware store.
- Now we can start. First, prepare everything. Take a water atomizer and fill it with water with a little washing-up liquid. You will need this later. Also have the spatula ready.
- Now first tape the sides of the joints with the tape. Only the joint should be visible in the middle. So glue the adjoining enamel and the adjoining tile on the edge of the bathtub or shower from, for the tiles the top and bottom or the left and right side next to the Gap.
- Then take the silicone syringe in hand and carefully and evenly fill the silicone into the corresponding joint.
- When you are done with the joint, take the water atomizer and spray the silicone with it.
- Then take the spatula and evenly remove the excess silicone from the joint. Then, before the silicone has dried, peel off the tape and throw it in the trash.
- Now you can move on to the next joint. Repeat the process until all of the grout in your bathroom is nice and white again.
Re-tile the bathroom - this is what you should bear in mind
So that you don't experience any unpleasant surprises when you re-tile your bathroom ...
