Remove mold from the roof window
Despite good ventilation, it can happen that mold forms in the apartment. Mold can even form on the roof window. This must be removed in any case.
What you need:
- Alcohol (70-80%)
- Ascorbic acid
- spray bottle
- gloves
- Wire brush
You should pay attention to this when removing mold
- Before you start removing, make sure you get enough fresh air.
- You must not remove the mold with a broom. There is a risk that too many mold spores will get into the air. These can cause allergic reactions in you if you breathe in.
- You should also not use fungicidal agents to remove mold from roof windows. Poisons can form here that can be hazardous to your health.
- Find the cause of the mold. This must be eliminated in any case.
Remove mold from the skylight without chemicals
- Get 70 to 80 percent alcohol and a little ascorbic acid from the pharmacy.
- Take a spray bottle and pour the alcohol and a little ascorbic acid into it.
- Spray the mold on the roof window with the solution and let it work for a good 1 hour. Make sure that there is good ventilation and no smoking during this time. Alcohol vapors are flammable!
- After that, put on gloves and brush off the mold with a wire brush.
- If necessary, repeat the process several times.
- If the mold is already deep in the wooden frame, use a fine piece of sandpaper to remove the last of the mold pores.
- Stop that wood dry and then fill the area with a silicone spray.
- Now you can move the frame or paint the area that was previously affected by mold.
Mold on the window seal - what to do?
Mold is very harmful to health. If you have any on your window seal ...
The acidity of ascorbic acid gives you that Mould successfully eliminated. However, you should regularly check the site for any Eliminate newly emerging mold spots immediately.
How helpful do you find this article?
