Cut foils for kitchen fronts and stick them on yourself

What you need:

• foil
• Craft knife
• screwdriver
• Folding rule
• Plastic spatula

Since, as a rule, only the fronts are stuck with this measure, the implementation is relatively easy. However, you should choose the foils for your kitchen fronts so that they fit the rest of the body.

Attach foils for kitchen fronts - the preparation

In order to ensure that the foils for your kitchen fronts are perfectly glued, you have to make preparations.

• So that you don't have to do a lot of trimming work, you should use the Doors dismantle. You should do the same with the fronts of the drawers if they are not glued.
• First unscrew the handles. Then dismantle the brackets.

Gluing foils - the work steps

Always work piece by piece with your foils for the kitchen fronts.

1. Take your foil and lay it out on a table that you have provided with a stable support.
2. Now take a door from the kitchen front and place the front front on it.
3. Now measure the side edges all around and mark them with a pencil adding 1 centimeter.
4. Then lay the door down with the front side up.
5. Take the foil and place it on one side in such a way that enough material remains that the side edge can be glued.
6. To brush Now carefully apply the film to the door with a plastic spatula while at the same time pulling off the protective film. Make sure that there are no wrinkles. The best thing to do here is to work in pairs.
7. Then cut into the foil at the corners so that you can pull it over the side edges.
8. Simply cut off the protruding film on the inside edge with a craft knife.
9. Then reattach the brackets and the handle and reattach the door to the cabinet body.
10. Do the same with the other doors and the drawers until all parts are covered with the foil.