Remove mold in joints in the bathroom
Oh dear, you've discovered mold in your bathroom, both on the window and in the joints. As you know, mold is very dangerous to health and also looks very unpleasant. It doesn't take much effort to get rid of this mold and at the same time prevent new ones.
You want the mold in the Put or on window in the bath put an end to it and also prevent new ones. With a little effort and patience, you can get it done very quickly.
How to remove mold in the joints in the bathroom
Of course, it is first of all a very uncomfortable feeling to know that you are Mould have in the bathroom. Since there is always a very high level of humidity in the bathroom and, especially in the cold seasons, you cannot ventilate indefinitely, mold quickly forms in the joints. Now is the time to do something about it.
- First, try to tackle the mold with vinegar and a rag. If this doesn't quite work, use a chlorine-based anti-mold agent for the grout in the bathroom and clean it with it. Make sure there is good ventilation.
- However, if the affected areas are silicone joints, then it will be a little more complex. You need to completely remove the silicone grout, clean it with alcohol or chlorine, and re-grout with silicone. After removing the mold, spray the cleaned areas with mold spray as a precaution.
- Now it is of course a matter of preventing new infestations. It is very important that the bathroom is ventilated very often, but this is only possible if you also have a window in the bathroom. If this is not the case, then leave the bathroom door open as often as possible, this also ensures a good exchange of air.
- You can also prevent mold by wiping the walls dry with a window cleaner or cloth after bathing or showering.
High humidity and ambient humidity are considered an ideal breeding ground for mushrooms. …
How helpful do you find this article?
