Repainting kitchen fronts made of veneer

instagram viewer

If you're one of those people who doesn't need a new kitchen right away, if the color is yours If you no longer like the kitchen fronts, then you have the option of redesigning your kitchen fronts paint. However, you should be particularly careful here and proceed correctly.

If you like your kitchen If you want to give your kitchen fronts a new look according to your ideas, of course you have to give your kitchen fronts a new color. You do not need a specialist for this, you can do this yourself with a little patience.

You can redesign kitchen fronts very nicely with color

If you want to redesign your kitchen fronts, there is an option in which you do not have to work very hard and the visual effect also comes into its own. paint Only your fronts and leave the old color in the rest of the places. Of course, the newly selected color should be selected appropriately. Particular care should be taken when determining whether your kitchen is using real veneer. The following instructions only apply to real veneer. There are kitchen fronts here where only a film has been applied. Under no circumstances should you grind these. Here you have to do it differently.

  1. Remove cabinet doors and drawers from your kitchen fronts. You must also remove the handles and brackets.
  2. ribbons Now carefully sand the surfaces with an orbital sander and fine sandpaper.
  3. If holes or cracks appear here, you can level them out with a special filler. You should then sand these areas down again.
    4. Painting kitchen fronts - this is how it gets colored

    Kitchen fronts have large areas on which you can let your creative ideas run wild ...

  4. With wood grain veneer, you have to decide whether you want to keep the grain or not. If you want to keep the grain, you have to apply a wood stain in a certain color after sanding and then coat the whole thing with a good clear varnish.
  5. After you have sanded everything, you have to make the surfaces absolutely dust-free. The easiest way to do this is to use a vacuum cleaner.
  6. You now have the option of working with a primer. However, this is almost no longer necessary, as most good paints have a very high opacity.
  7. Use a foam roller for your work. To brush You with her not in one direction, but all over the place. So you can be sure that the best results will be achieved on your kitchen fronts.
  8. If necessary, you can briefly sand the surfaces again and apply a second coat.
click fraud protection