Remove wall tiles in the bathroom
There are several reasons why wall tiles should be removed from the bathroom. On the one hand, this can be the fact that you have bought an older house that is still furnished with tiles from grandma’s times. On the other hand, it can of course also be the case that after a few years you finally want to see something new on your walls and modernization is therefore inevitable.
What you need:
- Flat chisel
- hammer
- Dust mask
- duct tape
- Hand grinder
Especially when removing wall tiles in the bathroom, you should make sure that sink and bathtub not by falling Tiles to be damaged. Otherwise it could happen to you that the tile renewal becomes a complete bathroom renovation. You should also be aware that this work can be a bit time consuming.
Wall tiles should be removed very carefully
- Preparing to remove your bathroom wall tiles includes protecting the rest of the living space. Since the work is quite dusty, this is where you should take precaution by doing the rest of the work Doors keep it closed and seal it with adhesive tape so that no dust can penetrate. Always work with the window open so that most of the dust can pull away immediately.
- Next, you should bathtub, Cover the shower tray and washbasin with old sheets so that tiles cannot be damaged.
- Before you start, please protect yourself with a dust mask to prevent you from inhaling the not entirely harmless dust. For your work, it is best to use a flat chisel and hammer, which are usually easy to remove the tiles. Of course, it is unavoidable that something falls off the plaster with individual tiles.
- It becomes more problematic if there is still tile adhesive residue on the wall. Of course, you should sand these down with a hand grinder. You then have to fill the holes with plaster again.
- So if you removed your old tiles and afterwards the walls you can put your new wall tiles in the bathroom.
When renovating a kitchen or bathroom, there is one job that nobody likes ...
How helpful do you find this article?
