Make tile mosaic yourself
Laying a tile mosaic is a special art that ancient cultures performed. One of the oldest mosaics was made as early as 3000 BC. The technique of laying a mosaic has hardly changed until now. Learn how to make a tile mosaic yourself.
What you need:
- tile glue
- Grout
- sponge
- Mosaic particles
- Tile cutter
This is how a tile mosaic succeeds
- You are probably one of those people who have some manual skills. Then making a tile mosaic yourself will not be too much of a challenge for you.
- You can get the material for your mosaic in small mosaic pieces in the craft shop or in the hardware store. You can also intentionally break tiles, and then reassemble them into a beautiful mosaic pattern according to your own ideas.
- All you have to do is lay these small tile pieces close together and apply an adhesive to the Underground attach. In a few words, this is the simple design of a tile mosaic. The visual representation is always created, either from a template you made yourself, or from an already existing sample.
However, you have to be patient for the execution of the Tiles-Apply mosaics. If you have enough serenity and calm, you will move forward fairly quickly and will have a lot of fun expressing your own creativity.
With a little sensitivity, you will not find it difficult to learn this technique.
- First attempts at your mosaic art succeed best with a ready-made starter set available in stores. You can get these packs complete with all the necessary ingredients on offer in craft stores or department stores. In addition to the mosaic particles, a suitable adhesive and the plaster mixture are already included. You can start making your mosaic straight away.
Tiles are very popular. You can choose between a variety of different varieties ...
Make a design yourselfÂ
Of course, your own design and the selection of the material according to your own ideas are even more creative. To do this, first draw up your design after you want to proceed and carry out the execution. Then measure the area that you want your tile mosaic to adorn.
If you want a piece of wall in the bathroom, then proceed here as with tiling. The only difference is that you do not lay complete tiles, but a tile mosaic made from pieces of tile.
You need a tile adhesive for this, which you mix according to the instructions and apply to the surface. Then arrange the tile parts according to your template and wait until everything has dried nicely.
Now you still have to joint everything. Use a matching color grout, which you mix again according to the instructions and apply nicely to the tile mosaic with a rubber spatula.
Then clean the entire mosaic surface with plenty of water and a soft sponge. And your work of art is ready.
By the way: corrections can usually - depending on the adhesive used - be carried out up to two hours after the start of the execution.
How helpful do you find this article?
