Set the transmitter correctly on Kabel Digital Home

who cable Digital Home uses, as with all other TV providers, you can find and tune in the channels using the TV's search function. But sometimes the search only finds some of the Kabel Digital Home channels. If this is the case for you, you can use these instructions to try to find the other stations as well.

Set the station manually

1. Call up the main menu (menu button on the remote control) and then the tuner. Then press 1 on your wired digital home remote control.
2. An * will appear after Frequ. If you now enter the 1130 via the remote control, the * disappears.
3. The * then appears again after the symbol. (Symbol rate) when you press 3. Enter 06900 there, the first 0 will be automatically removed, so only 6900 will remain.
4. Now press the 4 until a 64 (or 256) appears after QAM. If all entries were correct, the numbers 02 00 00 should no longer be displayed at the bottom. If it does, your system does not receive a signal and therefore no programs can be found.
   instagram viewer


Start the NIT search on Samsung devices - this is how it works

After the analog TV channels have been switched off, the digital channels must ...

5. If 02 00 00 has disappeared, you have to press 9. A list of the channels found should then open.
6. Press OK and then 7. This will add the channels found to the channel list and you can start sorting them according to your needs.

Find all Kabel Digital Home programs

1. Before manually searching for the cable digital home transmitter, we recommend activating the "old mode". To do this, call up the main menu and the Expert menu with 9.
2. Select "A General Setup" (Mark button) and press 7 to select "misc Setup". With the 1 you can then set the "old mode" to "active".

With this activation, channels can also be found on Kabel Digital Home, which may have been accidentally marked as data feed and are therefore otherwise overlooked during the channel search.