PVC flooring for the garage

instagram viewer

If you want to lay a floor in the garage, there is a PVC floor covering that is ideally suited for this and is very easy to lay. Read how it works here.

the garage is usually very plainly concreted. If you want to change that and consider one PVC-Flooring To put it in the garage, you have a special option for this. Because there is such a floor covering that is very robust and therefore ideally suited for garages. Another advantage of this PVC flooring is that it can be installed quickly and easily, even for newcomers to flooring.

How to lay the PVC flooring for the garage

  1. First, measure out the garage so you know how much of the PVC flooring you will need. Then you can look for a shop that sells this PVC flooring. Here you can, for example, for Flexi-Tile or Decor floor decide.
  2. Now you can clear out the garage and give it a thorough sweep. The garage floor should be completely dry and clean. Only then can you start laying the floor slabs.
  3. The PVC flooring consists of individual Tilesthat are connected to one another by a practical plug-in system. So start in one of the back corners of your garage and put on the first PVC flooring. Lay the following tiles at right angles from this corner.
  4. If your tiles are equipped with the plug-in system at all four corners, you can cut this on the edge tile towards the wall with a sharp work knife with a heavy-duty blade. Be careful and always cut away from you to avoid injuring yourself. Otherwise, of course, place the smooth side of the panel against the wall.
    5. Find the right floor covering for the garage - that's how it works

    Do you have a new garage or want to renovate an older garage and are still looking for ...

  5. Now lay another tile on the previous one and pin both of them together. Tap the teeth of the connector system lightly together with a rubber mallet until everything is in place. You can continue like this until the garage is completely covered with the PVC flooring.
  6. In the event that you come across corners or other obstacles at the edges of the garage, you can also cut the tile there with the utility knife. Cut out the gap so that there is a 0.6 cm (ΒΌ inch) gap. The distance to the wall should be at least 10-20 mm. This distance is used for expansion.

With this PVC flooring you have a resistant floor for your garage that you can sweep out and wipe with a mop.

click fraud protection