Wall design behind the stove
A large stove provides warmth and can save you money. However, in some households the wall design behind the fireplace looks more than sad.
Create an interesting wall design
Since a wood-burning stove generally emits a lot of heat, you should use the Wall design Do not use easily flammable materials behind the stove. However, you could use steel plates for a visually appealing design. Steel plates are heat-resistant up to a very high number of degrees and you can use them to create a beautiful Wall cladding create.
- In order to create a beautiful wall design behind your stove, you should first of all consider the wall or the walls Measure behind your stove. If your stove is in a corner, as is very often the case, you will need to weld two metal plates together.
- The steel plates should be made of stainless steel and be at least 1 cm thick. You should drill holes in the panels, which you then transfer to your walls.
- After you have transferred the holes in the steel plates on your walls behind the stove, drill them and insert metal dowels.
- Since the chimney often runs behind stoves, you should not drill too deep. Just so that the dowels just fit and then the steel plates can be screwed on.
Wall color white too boring? - Suggestions for a colorful living room
White as a wall color for a living room can sometimes look boring. White ...
It is worth seeing behind the fireplace
- After you have drilled all the holes and set all the steel dowels, you can now start decorating the steel plates yourself. In order to put as beautiful motifs as possible behind your stove, you should look for beautiful motifs, for example in newspapers or on posters, which you can then trace on your steel plates.
- After you have provided the steel plates for the wall design behind the stove with beautiful motifs you can borrow a small engraving machine and engrave your designs on the steel plates engrave.
- Since the color of the engraving is different from that of the other metal, an engraving alone should suffice, but you can also trace the engraved motifs with fire-resistant paint. After this has been done, you should screw the steel plates to the walls behind your stove and you have a beautiful wall design.
Before you start engraving on your steel plates, you should practice a little beforehand on an old sheet of metal.
How helpful do you find this article?
