Build your own TV shelf

instagram viewer

If you are toying with the idea of ​​buying a new TV shelf, you should perhaps first think through a cheaper alternative. Simply build your TV shelf yourself.

Build a modern TV shelf.
Build a modern TV shelf.

What you need:

  • 1 x drill
  • 1 x jigsaw
  • 3 x oak wood panels
  • 6 x wood screws
  • 1 x milling attachment with 3 cm diameter
  • 6 x wooden feet
  • 1 x can of wood glue
  • 12 x round timbers
  • 1 x tape measure
  • 1 x pencil
  • 6-8 screw clamps

A new TV shelf is created

These instructions are for an oak TV shelf with two shelves. Before you can start cutting your TV shelf, you should first visit your trusted hardware store. You need a can of wood glue, a milling attachment with a diameter of 3 cm, a packet of wood screws, a jigsaw and a drill.

  1. Cut your headstock for the TV shelf from a 5 cm thick oak board. The dimension is 200 cm x 80 cm. Your TV set will then be on this plate.
  2. Next, cut the base plate from 3 cm thick oak wood to a size of 200 cm x 80 cm. Six small legs are then screwed under this plate. Next, cut the clipboard from 3 cm thick oak wood to 200 cm x 80 cm.
  3. Now cut 12 round pieces of wood with a diameter of 3 cm and a length of 25 cm each. The material is made of oak. These round timbers are then glued between all the panels.
  4. Then you have to cut six small wooden feet from 5 cm thick oak wood to the dimensions 5 cm x 10 cm. These are the feet of your TV shelf.
    5. Heating cladding made of wood - instructions to build yourself

    The entire room is nicely furnished, only the heating looks like a ...

This is how the TV table is assembled

  1. Take your base plate and glue the feet to the bottom. The six feet should be placed at the outer corners and right in the middle. Then turn the plate over and screw the feet together with wood screws.
  2. You now have the base plate with feet. Take a pencil and a tape measure and draw a rectangle on your base plate. The rectangle should be 160 cm x 60 cm. The milling points are now drawn on this rectangle. One in each corner and two opposite in the middle.
  3. When the points for your TV shelf have been marked, use the 3 cm milling attachment to mill a hole 1 cm deep into each point wood goes. You then also adopt these points for your intermediate plate and your head plate.
  4. When all points have been marked on your TV shelf, mill all points with the 3 cm milling attachment to a depth of 1 cm. Now take the wood glue and apply it to each milled hole in your base plate. Be generous with this To brush, these logs have to withstand a lot.
  5. Do the same with the holes in the clipboard and the headstock. When all the panels are in place, wrap your TV shelf in protective rags or one carpetNo matter what, the main thing is that the wood is protected.
  6. Then tighten six to eight screw clamps. When the wood glue is really dry after a day, you can remove the screw clamps and your TV shelf is ready for use.

Devices such as receivers and DVD recorders should also find a place on this TV shelf.

How helpful do you find this article?

click fraud protection