Build a light well attachment out of concrete
To get light in a basement room, you can install light shafts in front of the basement windows. These are available in the hardware store. But how about if you just make a light well attachment out of concrete yourself?
What you need:
- 32 grit gravel
- Crushed sand
- Screed concrete
- water
- Bricks
- Concrete tub
- Trowel
- Frankfurt shovel
- Rake
- pimple
- wheelbarrow
- Tension cord
- Spirit level
- Shuttering boards
- Screw clamps
- Nails
That brings you a light shaft
- If you install a light shaft in front of your basement window, sunlight falls into your basement and you can use the room as a basement. So you simply gain living space.
- With a light well attachment, not only light but also fresh air comes into your basement room. The room thus gains twice the quality of life and can be viewed as a fully-fledged living space.
How to prepare the light shaft in front of the basement window
- Schacht before that window the end. To be able to work better, you should dig about 50 centimeters more on all sides.
- Dig about four inches deeper. Fill under the shaft first with 32 gravel and then with crushed sand.
- Concrete a floor slab for the light well attachment made of screed concrete. Let it dry out for at least 72 hours.
Create a light shaft in front of the basement window
In the case of structural changes, as well as in the case of a new building, it may be necessary to ...
How to build the light well attachment out of concrete
- Use sound boards to create the shape of the light shaft attachment. Connect the sound boards with nails and screw clamps.
- Pour screed concrete into the form and let it harden for at least 48 hours. You can then remove the sound boards.
- To brush Paint the manhole with bitumen to make it watertight. You can get the color in building materials stores.
- Fill outside the light shaft attachment with the excavated earth. Compact the earth with a plate compactor.
- You can cover the light shaft with a grille. You can get this in hardware stores or in building materials stores. If it doesn't fit, you can cut it to size with a flex and smooth the edges with a file.
How helpful do you find this article?