Cool craft ideas with felt

instagram viewer

There are many cool craft ideas to be found. Those who like to do handicrafts will find the many different materials such as B. FIMO, plaster of paris, construction paper, wool, felt, etc. know. It is interesting when you use different materials together, such as B. Felt and pipe cleaners that can be used to create a wide variety of figures.

Make pipe cleaner figures for the dollhouse.
Make pipe cleaner figures for the dollhouse.

What you need:

  • two pipe cleaners
  • a larger, perforated wooden bead (later head)
  • two small, perforated wooden beads (later hands)
  • Wool
  • felt
  • Crayons
  • scissors
  • Glue
  • twine

Cool craft ideas challenge the imagination

  • If you are looking for cool craft ideas, it will not be difficult to find a lot of suggestions on the Internet. But if you are looking for new, cool craft ideas, you could run into problems. The difference is simply that an infinite number of craft ideas are already being disseminated over the Internet - but very few are actually "new".
  • Basically that's not tragic either, because with enough imagination, well-known handicraft materials as well as basic, well-known handicraft ideas for new creations can arise. Just ask z. B. Pipe cleaner figures for a soccer team or figures of different sizes for a family for the dollhouse.

How to make the pipe cleaner figurine

  1. Take the first pipe cleaner and bend it in the middle. Cut about 6 to 7 cm long strips from the wool and put them in bundles.
  2. Now you need the larger, perforated wooden bead. Push the pipe cleaner, bent in the middle, through the bead so that the break appears on the other side.
  3. Carefully divide the break point of the pipe cleaner in order to push the prepared, bundled wool through. It is useful if you tie the wool together in the middle beforehand. Carefully spread some glue around the wooden hole onto which you are about to pull the wool "hair".
    4. Tennis balls recycling - 5 craft ideas

    You don't have to throw away tennis balls if they can no longer be used, for example ...

  4. Pull the pipe cleaner back on the two open, parallel strips so that the break point contracts again and the wool is pressed tightly against the wooden ball.
  5. Then carefully spread some glue around this lower area of ​​the wooden hole, from which the parallel pipe cleaner protrudes and to which the arms are attached.
  6. To do this, fold the second pipe cleaner in the middle to mark the middle. Open it again and loop it in its middle position tightly around the parallel pipe cleaners (later legs), directly below the "headwood ball".
  7. Look at the proportions and the small wooden ball holes. If the wooden ball holes are so large that the balls would not sit tightly, bend the "pipe cleaner arms" in order to push them in two positions through the "wooden hole". The outstanding pipe cleaner is intertwined in such a way that it holds the wooden ball as a small knot.
  8. Now cut out felt a hat by cutting out a three-quarter circle of felt according to the size of the wooden ball and gluing it together to form a "bag". Check that the "hairs" are well glued to the roots so that the felt hat can be glued to the hair. After everything has dried, trim the wool into a hairstyle.
  9. The clothes are left to your imagination. It is useful to make a cape with a neck opening. The two arms and arms are pushed through the neck opening to keep the opening as small as possible.
  10. Then stretch your arms apart again and glue the cloak together below the arms in places. Cut e.g. B. Add a ruff or a scarf made of felt and decorate the neck area or stick a pocket on the cape.

How helpful do you find this article?

click fraud protection