VIDEO: Set thermostats correctly

There is a thermostat on every radiator in a house or apartment. Thermostats regulate the heat and can be set manually. In most models, this is done by turning. Numbers are printed on the thermostat and there is also a mark for permanent setting. With this, the room temperature is kept constant at around 22 degrees.

Adjust the thermostats to the central heating control

• A modern heating system not only has thermostats on each radiator, but also a central control unit. You can use this to define a constant temperature throughout the house or apartment. In order for the thermostats to maintain this temperature, they must be set correctly.
• Every thermostat that has been installed on a heater has a marking for a standard setting. This can be identical to a number, which is then marked in a special color. Often times this is the number 3.
• Other thermostats have an arrow or a point. If you want to run the heating from the central control, you should turn all thermostats to the mark. This ensures that the temperature defined by the control is maintained in all radiators.

Manual control of the thermostats

• You can also regulate the heating manually. To do this, you need to adjust the thermostats individually in each room.


Adjusting the thermostat of the gas heater - tips

Modern gas heating systems are usually controlled by various thermostats. The …

• As a rule, a lower number also means moderate heat output. This increases with each digit. In basement rooms or in the pantry, where it should stay cool, you should turn the heating to the "frost-free" setting. The heating only switches on when the temperatures threaten to drop below zero.
• If you want it to be warmer spontaneously, you can turn up the thermostats in the relevant room. The room temperature will rise in a short time.

Whenever you ventilate a room, you should always turn the thermostats to zero. Otherwise it works heater and you are heating for outside, so to speak.