How do I build a tree house?

What you need:

• Screws
• Nails
• boards
• Wooden panels
• bar
• Afford
• Roofing felt
• Wood protection glaze

How to build a tree house

• First you should choose a suitable tree on your property or on a property where you are allowed to build a tree house. The tree should have as many thick branches as possible so that you can build your tree house in a really stable way. After all, the tree must also be able to carry this burden. When you and your children have found the right tree, you can start planning. The tree house should be set up in the middle, on many supporting branches, if possible.

• Whether you build the floor from a single slab or individual boards doesn't really matter. However, you should paint all wood with a protective wood varnish before starting construction. This is how it will be
  instagram viewer
  wood Protected from the elements and lasts longer. Then saw the base plate or the boards fit the ground and fasten them to the tree with long screws. Then screw strips all around to give the whole thing a little more strength.

• After that, use angles and screws to attach a beam to each corner. The boards for the individual will later be attached to this beam walls appropriate. Now measure the distance between the joists and saw the boards for the walls to the appropriate length. Now screw on one board after the other from bottom to top until the tree house is the desired height. If you want to build your tree house with windows, then simply cut the boards a little shorter. If you do this on both sides, you will automatically get an opening in the middle, which is called window can be used.

• Finally, screw down strips around the window frame, as with the floor, to give the whole thing more support. That roof you should build with an overhang of at least 40 cm per side. It is completely sufficient if your tree house is covered with a simple flat roof. You can either paint it or protect it from rain with roofing felt.