Build your own chairs for overweight people

instagram viewer

Are you very overweight yourself or do you have overweight people in your household? Then you can easily build chairs yourself for people with a little more on their ribs.

No question about it: life as an overweight person brings many difficulties with it. But if you struggle with the scales, you can at least live your life in your own household through figure-fitting furniturethat are not geared towards the slim make it easier. How you can build chairs for overweight people yourself, even if you are not a professional, read below.

Take the right measurements for your own chairs

  • If you want to build chairs for certain overweight people, you have the advantage that you can of course take your measurements individually. The chair, or its seat, should of course be as wide and deep as the buttocks of the later seated person, but there the buttocks, if you sits down, is practically pushed wider by the body weight, it can't hurt if the seat surface is 10 to 20 centimeters beyond it goes.
  • The height of the chair, i.e. the length of the legs, is also crucial, because the overweight person has to sure to get both legs effortlessly on the floor in order to relieve the body a little later while sitting can.

Chairs for overweight people - this is how building works

  1. After you have taken your measurements, first use a jigsaw to saw the seat from a sturdy, but not too hard one wood. Beech is easy to work with and is ideal.
  2. Then saw the legs out of thick (5-10 centimeters in diameter) square timber made of the same material. Square timbers ensure a secure stand and a robust look. Remember that the two back legs must be much longer than the others because they will support the backrest.
    3. Build a Hollywood swing yourself - this is how it works

    Those who often spend their free time in the garden will not only find tables and chairs, ...

  3. Then you need to attach the four legs. As a layperson in particular, you should work with angles that you screw onto all four sides of each chair leg. Bring the legs as far out as possible.
  4. Last but not least, screw the backrest to the protruding rear chair legs. It is essential to use dowels for all screwing work.

You can see how easy it is to build chairs for the obese. You now have a fairly simple model, but of course you can embellish it with the help of varnish as you wish.

click fraud protection