Mount the walkway on the roof

What you need:

• Roof steps
• Spirit level
• Wrench

To ensure that serious accidents do not occur when working on the roof, a walking grate should be installed on the roof definitely include them in your considerations. This is mostly attached in the form of steps. These are relatively easy to assemble. Of course, only a limited part of the roof can be worked on, but with a secure footing without the risk of falling.

Attach the walkway grate to the roof - the preparation

• A walkway on the roof is usually installed as a roof step. You need for that Assembly the first two steps, however, require a stable ladder or scaffolding. Then further assembly can be carried out using the installed steps.
• You need a suitable wrench and a spirit level for your work.

Installation on the roof - the work steps

1. The assembly of the steps on the roof is carried out using the clamp mounting method.
2. In order to be able to attach these brackets, you have to remove the head rabbet of the roof tile in the clamping area.


Assembly of the snow guard - this is how you attach it to the roof

So that your visitors, while they are still standing in front of the front door, do not ...

3. The brackets are then hung over both the roof batten and the roof tile in such a way that the step grille fits exactly onto the brackets.
4. Now you have to adapt the grating to the roof clipping. To do this, loosen the upper screws of the supports and move the lower screws according to the incline. To do this, work with a spirit level. Then the screws are tightened again with a wrench.
5. Now all you have to do is attach the grate to the retaining plates using hook screws.
6. Continue to do this until all the steps are in place.