Clean tiles after grouting
Cleaning the tiles after grouting can be quite a drama. The unsightly cement veil often hides the view of the decor of the tiles. Below is how to get the tiles clean after grouting.
What you need:
- water
- sponge
- Cement film remover
Clean tiles while grouting
- Tiles are difficult to clean after grouting. The cement veil lies firmly on the tiles and spoils the joy of the new tiles in bath, kitchen or hallway.
- In order to reduce the cement haze a little, it will help if you apply a little water to the tiles with a wet mud immediately after the slurry.
- Do the same thing again immediately after the grouting has been completed. Go over the tiles one more time with a wet sponge. But be careful not to use too much water. Otherwise you will also rinse out the joint. This creates unsightly over-teeth between the joint and the tile, which under certain circumstances can lead to damage to the tiles.
Clean the tiles after grouting
- Proper cleaning of the tiles begins after the grout has hardened. If you start cleaning before it hardens, then wash out the grout again and the job was in vain.
- However, you will need a cement film remover for thorough cleaning. Depending on how dirty the tiles are, the concentration of the cement residue remover must be. If the pollution is large, the agent must be more concentrated in order to be able to remove the veil.
- If you wipe the tiles with a sponge and clean water after applying the cement film remover, the cement film should be completely gone. You will hardly have any success with common cleaning agents.
Removing cement veils on tiles - this is how it works
Done with laying the tiles and now a gray haze makes the beautiful result ...
If you have the Tiles cleaning after grouting, you need a little patience and caution so as not to ruin your work again.
How helpful do you find this article?