Install a fan-shaped balcony privacy screen
A fan screen on the balcony protects you from prying eyes, provides shade and protects against drafts. The practical shield is quickly installed.
If you feel like you are on a "platter" on your balcony, you can with one Privacy screen remedy the situation quickly and easily. Particularly practical, especially for balconies, is a privacy screen that is shaped like a fan and that can also be opened and closed like a fan.
- In contrast to a fixed privacy screen wall, e.g. B. made of wood, a fan-shaped protection can be opened and closed as required. So you can determine yourself how "open" or shielded you want to sit on your balcony at any time.
- In addition, the protection can be easily folded in during an approaching thunderstorm or strong wind and thus does not offer the gusts any attack surface.
- For this reason, fastening with four screws and - depending on the wall material - dowels is generally sufficient and can be implemented without much effort.
The ideal position on your balcony
- Ideally, you attach the balcony privacy screen fan in the corner that results from the angle between the balcony parapet and the house wall. This is how the shielding is most effective and this is how it looks most harmonious.
- If your compartment can be folded on both sides, you can mount the mounting bracket either on the balcony parapet or on the house wall. Decide how it fits better in your case.
- If the privacy screen can only be folded to one side, it is usually cheaper to attach it so that it is facing the House wall is folded away because it is better protected from dirt than when it is on the balcony parapet rests. In this case, you need to attach the mounting bracket to the wall of the house.
Manufacture sun sails inexpensively - this is how it will work
There are plenty of shade providers, some of which are bad on small balconies ...
How to assemble the privacy screen compartments
- First draw the markings for the holes to be drilled by placing the privacy screen fan at the desired location.
- Now drill the holes. Depending on the wall material, either with a drill or by lightly hammering in a nail (for wood).
- If it is a stone wall, insert the dowels now.
- Now all you have to do is secure the privacy screen compartment with the screws. Complete!