Adjust balcony and patio doors
There is nothing more annoying than balcony and terrace doors that do not stay open or are difficult to open and close. The doors are relatively easy to adjust. You can find out how best to proceed here.
Even non-professionals can adjust balcony and patio doors: it's really easy
Is the balcony or patio door creaking? Or is it difficult to open or close? Maybe it won't stay open either. Luckily, it's not rocket science to set a door even as a layman.
3 points to adjust the patio or balcony door
At doors there are a total of 3 items that need to be adjusted. The 3 points include the corner bearing with two set screws, the metal scissors and the pegs on the door handle side.
However, there is no standard specification for the thread. That's why you first have to look at which tools you need.
How you proceed when adjusting the doors now depends on what exactly needs to be adjusted. Is the contact pressure wrong? Does the door rub at the edge? Is there a problem with the height? Does the door leaf have to be adjusted laterally?
Change the contact pressure of the patio door
If drafts get in or the door rattles after closing, the contact pressure must be readjusted. The mushroom pins, which are usually located on the door handle side, are relevant for this.
Even if you take care of your balcony door regularly, it can happen that from time to time...
Both mushroom cones are metal rollers. If you want to increase the contact pressure, pull out the mushroom caps and turn them clockwise. If you want to reduce the contact pressure, turn in the other direction.
You may also need tools such as Allen or Phillips. It depends on the model of patio and balcony door. If the contact pressure is set correctly, it can be easily opened and closed afterwards. But she's firmly in the frame.
Adjust diagonal
It can also happen that a door is crooked and therefore rubs on the side edge. This happens because the door can sink down over time.
Find out if the door is really crooked. To do this, measure the distance between the frame and door leaf on both sides. If the distances are different, the door is crooked.
In that case you have to shear bearing pull up with a screwdriver or Allen key. The screw is usually in the corner above the door hanger. Now turn until the frame and sash are parallel again.
If the door cannot be pulled up high enough, you may also need to make adjustments to the corner bearing. In this case, however, you screw the entire door up and down.
adjustment in height
If the entire patio or balcony door drags when opening or closing, it is either too low or too high. In this case you have to correct the door leaf up or down.
To set the height, you must at the upper Corner bearing screw turn. In most cases it is located under the protective cap. If the door leaf needs to be raised, turn clockwise. Sometimes it is also necessary to readjust the shear bearing.
Adjust the balcony or terrace door to the side
You can also adjust the balcony or patio door to the side. In that case you have to at the bottom screw of corner bearing turn. It is also usually necessary to readjust the shear bearing.
If you want to move the door towards the handle side, turn the pivot hinge clockwise and the stay hinge counterclockwise. If you want to move the door in the other direction, proceed in the opposite way.
Without special knowledge about the optimally adjusted balcony and terrace door
Many people think that adjusting a patio or balcony door is not easy. As you can see from our instructions, it's not that complicated. With a few turns of the right screws, even as a layman, you can ensure that the door opens without Grind and creaks can be easily opened and closed again.
