The construction of a wooden stud wall explained in detail
Would you like to redesign or rearrange rooms? Wooden stud walls are ideal for the purpose. A wood stud wall is easy to erect, so you'll soon have the space rearranged. But how exactly do you go about it? Here you get an overview.
With wooden stud walls to create a cozy home: not difficult at all
Especially in old buildings, the room layout is difficult. If you take over an old house or would like to divide up your residential property differently, you no longer have to build walls or do other complex work.
The stud walls off Wood are a perfect choice to create two smaller areas from a large room in a short time. I have summarized the individual steps that are relevant to erecting a wood stud wall.
Step by step to the wooden stud wall
Of course, a certain amount of work is necessary. It starts with attaching the wooden beams to the floor and to the Ceiling. The individual steps look like this:
-
Fasten floor and ceiling joists.
The beams should preferably reach from one side wall to the other wall. Floor and ceiling joists must be attached exactly one above the other so that the wall surface is straight. First align one of the beams optimally with a spirit level and folding rule. Now you can drill holes and insert dowels. Then screw the screws through the beam into the dowels. Then you can align the other beam accordingly with the spirit level and also screw it on. Screw connections should preferably be made every 30 to 40 cm to ensure an optimal hold. -
Align wooden slats vertically and screw on.
Once the two joists are attached, attach the wooden slats vertically. This works particularly quickly and easily by screwing metal brackets to the wooden strips and beams. Make sure that the beams and wooden battens are flush. Otherwise, the drywall panels cannot be optimally fixed. For the wooden slats, also set a distance of 30 to 40 cm. -
Attach drywall.
As soon as the stud frame is in place, you can already attach the drywall panels to one side. Always set the screws in such a way that the panels are screwed to the wooden strips. There is always a joint between two panels, which you simply seal with adhesive tape. You can clean over it and thus remove the joint. Once one side of the stud wall is paneled, you can bring in insulation material. Now you can also screw the drywall panels from the other side. The wall is already finished and can be designed.
Shōji - written in Japanese, it looks so pretty: 障子 - is the name for a room divider, ...
A craftsman is not always necessary
As you can see, a craftsman is not absolutely necessary. You can quite comfortably yourself with that Building start with a drywall. It certainly makes sense to have a skilled person with you at the beginning to align the beams optimally. But once the beams are fixed, it's just a small thing.
