Washing machine: pump is clogged

instagram viewer

Nothing is more annoying than not being able to do your laundry because the washing machine won't even begin to pump out the water. The pump is then usually clogged. You can repair this damage yourself quickly without hiring a craftsman.

The washing machine's pump may be clogged or defective if it no longer drains.
The washing machine's pump may be clogged or defective if it no longer drains.

What you need:

  • Pipe wrench
  • bucket
  • cleaning rags

Troubleshooting when the washing machine does not empty

  • Works yours Washing machine no longer flawless, this can have several causes. The pump does not always have to be blocked immediately.
  • First of all, start troubleshooting by checking that the power is working. You can recognize this by the control lamp. If this does not light up, you have to insert the plug more firmly into the socket.
  • If the light does not flash even though the plug is in the socket, you must check the fuse box. Maybe the fuse has blown. You can see and correct this immediately.
  • If the washing machine has electricity and the water is still not pumped out, you must check the device.

The lint filter, drainage hose or pump is blocked

  • Before the pump on the washing machine is blocked, something may have gotten stuck in the drain hose. It is also possible that there is simply a kink in the hose. Move the machine away from the wall and check the hose.
    • Miele washing machine - repair instructions

    Anyone who has a Miele washing machine has opted for the quality of a well-known ...

  • Without further ado, unscrew the drain hose and scan it for blockages. You can then clean the siphon. A lot can get stuck there. If the siphon and hose are free from blockages, screw both back on.
  • It is now mandatory to clean the fluff filter. You should repeat this every two to three months anyway. You will find the fluff filter at the bottom right of the washing machine. Open the flap and screw on the sieve. If it doesn't come off easily, use a pipe wrench. Be sure to place a container underneath to catch the water. If the water has completely drained off, check whether there are any scraps of fabric in the sieve or whether it can move freely. Only when it can move freely do you screw it back on.
  • The device should now pump out again. If not, contact a technician. You cannot repair a defective pump on your own. The technician must check whether the motor is defective.

How helpful do you find this article?

click fraud protection