Philips Arcitec RQ1095- how to clean the shaver properly

instagram viewer

If you have the Philips Arcitec RQ1095, it is no problem to keep the shaver nice and clean and functional. So you always have a hygienic razor.

Daily cleaning of the Arcitec

Philips has recognized that there is only one type of hygienic cleaning and that is washing. After all, don't just brush your sweater down, either. The Arcitec RQ1095 can handle water without any problems. Do these steps after each use:

  1. Turn on the hot water tap. Wait until the water is warm.
  2. Turn on the shaver. Hold the shaving head in the water jet for a few seconds. Turn off the water.
  3. Extend the trimmer. Brush it off with the short side of the enclosed brush.
  4. Let the razor air dry.
    5. Make your own shaving head cleaner

    You can make a shaving head cleaner yourself, but this one is not ...

Cleaning the RQ1095 with Jet Clean

If your Arcitec RQ1095 is equipped with the government system, then whenever it needs to be charged, you should combine this charging with cleaning. However, carry out the daily cleaning as described.

  1. Connect the Jet Clean System to a socket. Fill in the cleaning liquid.
  2. Remove the protective cap from the shaver. Place the Philips razor head upside down in the system, with the display facing forward.
  3. Now press the shaver firmly into the holder. Now switch on the Jet Clean System. Now the razor is cleaned thoroughly with a special liquid.

This is how it works without the system

  1. Pour hot water into a bowl. Dissolve some liquid soap in it.
  2. Use the shaving head to dip the device into the liquid.
  3. Turn on the shaver. Wait 30 seconds.
  4. Now turn off the razor. Discard the liquid.
  5. Now rinse the shaving head with warm water from the tap for 10 seconds.

So you always have a hygienically perfect razor.

click fraud protection