Correctly cut and stack pile logs

Cut the logs to length

The following describes how you cut pile wood and put it on logically and practically for removal.

• Before you cut your pile wood to length, you should think about what you are going to do with it. If you do that wood If you want to cut for your own oven, you should not leave the pieces too long. A length of 100 cm is sufficient for normal firewood.
• If you turn your pile wood into paper wood for further industrial processing, the respective pieces are cut to a length of 200 cm. It always depends on how thick the respective trunks are. Since beech wood can be very thick, it would be an advantage if you had an extra helper at work.
• So that you don't have to measure each beam separately, you should open a small straight branch Cut length so you can easily measure with the branch before cutting the logs into pieces cut. After you have correctly cut all the trunks to length, build the pile directly on the driveway from which the wood is to be picked up.
  instagram viewer

The heating medium is piled up

1. In order to properly stack the logs on the wayside, cut a trunk six meters long and bury half of it in the ground.


Firewood shelter - construction instructions

Since firewood is still too damp after it has been felled to put it in the fireplace at home ...

2. Then cut four thinner bars to a length of 220 cm.
3. Place two 220 cm trunks at the ends of the six meter long trunk.
4. Depending on the length of the wood, place the two 220 cm trunks either 70 cm or 170 cm apart, 20 cm deep in the ground.
5. Then lay your logs next to each other on the six meter trunk. Make sure that your log is flush with the trunk at the front.

Then put one row on top of the other until you are 200 cm high. If so, you have put on either 12 cubic meters or 24 cubic meters of pile wood.

You should wear protective gloves when working.