Elektra Beckum SPA 1000

The efficiency of the Elektra Beckum SPA 1000

• The motor power of the Elektra Beckum SPA 1000 is 0.37 kW or 230 V. The machine works with a negative pressure of 740 Pa and has a total weight of 17.5 kg. The diameter of the suction hose is 100 mm, while the hose length is 2500 mm. The Elektra Beckum SPA 1000 collection sack holds 50 liters. Based on these facts, you can get an overview of the efficiency of the Elektra Beckum SPA 1000.

• As already mentioned, the small vacuum cleaner is suitable for vacuuming planing, milling and sawdust. Paint and varnish mist, gases or dusts must not be extracted. It is ideal if you empty the collection sack after each use.

• The filter should also be cleaned at regular intervals. Above all, make sure that you do not use the Elektra Beckum SPA 1000 to pick up any spark plugs or other objects that could explode.

  instagram viewer

Brief assembly instructions for the Elektra Beckum SPA 1000 

1. Insert the precision tube into the cross base using the conical socket.

2. Mount the housing of the Elektra Beckum SPA 1000 on the pipe and then tighten it with the hose clamp.



Elektra Beckum BAS 250 G - this is how you install the band saw blade

The BAS 250 G from Elektra Beckum is a so-called band saw, with ...

3. Then you have to put the dust bag over the upper air outlet opening and secure it with a strap.

4. Fasten the dust bag container to the housing of the Elektra Beckum SPA 1000 using two washers (diameter 8.4 mm) and two hexagon nuts, size M8.

5. Assemble the garbage bag using another strap on the lower air outlet opening.

6. Finally you have to put the spiral hose of the small vacuum cleaner on the socket of the housing and clamp it with a hose clip. There is a transition ring at the end of the spiral hose, which you also have to clamp in place with a hose clip.

When you have completed all of these steps, the Elektra Beckum SPA 1000 is ready for use.