Correctly apply copper paste to brakes
A copper paste can be applied to prevent screeching of the brakes on the motorcycle. This should only be done by experienced "screwdrivers".
What you need:
- experience
Correctly applied copper paste prevents the brakes from squealing
the Brakes are a kind of life insurance for a motorcycle. Work on the brakes may therefore only be carried out by beginners or laypeople if the work is monitored and checked by an experienced "screwdriver".
- When the brake pad and brake cylinder come together, it can cause a squeak, especially with older motorcycle models. To stop this, first remove the brake caliper.
- The brake pads are suspended from two movable pins. Pull these pins aside to remove the brake pads.
- Now apply a peanut-sized piece of the copper paste to the back (important, not the front!) Of the brake pads and spread it out. Please ensure that you work properly and do not "smear" anything. Then reinstall the brake pads and the brake caliper in reverse order.
- You can also apply the copper paste to the back of the new brake pads when changing brake pads and linings.
- Copper paste is available from motorcycle accessories stores or hardware stores. It leaves greasy stains on clothing and skin. The paste can cause allergies in sensitive people. Therefore, even if it is "uncool", you should think about wearing disposable gloves when applying, which you can dispose of after work.
- After working on a motorcycle's brakes, it's on your own safety It is important to test the functionality of the brakes when driving slowly for the first time.
Copper paste when changing tires - information
Copper paste is something that should not be missing in any good car screwdriver case. …
How helpful do you find this article?