Correctly protecting wood for the bathroom from moisture
Wood for the bathroom - is that recommended or rather impractical? What you should consider in order to enjoy it for as long as possible-
What you need:
- possible Wood suitable for damp rooms
- Possibly. Wood preservatives
- good ventilation
- Possibly. Infrared heating
If you go to bath- bathroom design wood In principle, this is not a problem, as long as you take into account some properties and special features of the material. However, you cannot use every type of wood for every purpose in the bathroom.
Wood is a natural material
- Untreated wood is - depending on the type - only suitable to a limited extent or not at all for the bathroom. The property of wood humidity absorbing it and thereby changing its dimension is different for the different woods.
- Soft woods such as B. Spruce, fir, pine, etc. more moisture than hard tropical woods such as bankirai and teak. But there are also native hardwood species, such as oak and ash, that are well resistant to moisture.
- Depending on the exact place of use, you should decide which type of wood you choose and whether or not how you handle this. For protection and impregnation, z. B. Lacquer, stain, wood oil or wax.
Natural material for the bathroom means increased maintenance costs
- However, certain bathroom areas are not very suitable for designing with wood, or if you do But if you decide in favor of this material, you will have to pay more attention to the care and maintenance calculate.
- Inside the shower, for example, your wood paneling is treated - no matter what type and however - quickly show white limescale, which you have to scrub off relatively laboriously and with quite "sharp" means. This roughen the surface further, or wears off any moisture protection that may have been applied and makes the wood dirty and gray even faster.
- In any case, if you use wood for the bathroom, you should always ensure good ventilation, especially after showering or bathing when there is a lot of steam and moisture in the room. Wood in particular tends to quickly develop mold when it is "permanently damp".
- Infrared heating is therefore an advantageous solution for the bathroom. Thanks to the heat wave technology, the built-in wood also dry faster, and Mould is better prevented.
Correctly attach the wooden ceiling in the bathroom
A wooden ceiling in the bathroom must be made of particularly moisture-resistant material and so ...
How helpful do you find this article?
