5.1 Setting up the sound system with radio

instagram viewer

A 5.1 sound system consists of five different loudspeaker boxes and a subwoover and ensures a very appealing surround sound. Such a system can be connected either by cable or by radio and can be used on the computer or on the television.

This turns the living room into a home theater.
This turns the living room into a home theater.

5.1 sound systems offer high quality

  • If you turn your living room into a sophisticated one Home theater want to transform, then you should definitely buy either a 5.1 or a 7.1 sound system and connect it to your television. You can distribute the individual loudspeakers throughout the room. The center loudspeaker is located in the front and the two front loudspeakers on the right and left. The two rear speakers will then be placed behind you.
  • It is best to place the subwoover in a suitable place a little outside and directly on the floor. This device provides a rich bass and gives your music system the finishing touches. As a rule, such systems are connected to one another by cable, but professional radio systems are now also available.

How to set up the radio system

Would you like to buy a 5.1 sound system and definitely not cable in your living room, you should use a wireless version. The individual speakers are connected to each other wirelessly and offer a very high quality. Due to the lack of cables, you are much more flexible in setting up the boxes and can distribute them across the entire room without any problems. On the whole, the system works very simply, the speakers each have a receiver and the main unit is equipped with a transmitter.

  1. Place all speakers in the desired positions and switch on the sound system.
  2. Now you can wirelessly connect the individual speakers with each other and to do this you have to gradually synchronize them with each other.
    3. HDMI over radio - this is how the wireless connection works

    The HDMI interface enables you to have very high picture and sound quality and ...

  3. You have to repeat this process for each loudspeaker. Start the synchronization on the main device and hold down the appropriate button on the loudspeaker until both devices have recognized each other.
  4. Repeat this process for the other loudspeaker boxes and you have successfully connected them to each other.
  5. You can now test the speakers and make your settings.

How helpful do you find this article?

click fraud protection