Use soft wood for carving
Soft wood can be used for carving because it is easier to work with. This is how you can find appropriate woodcarvers for carving.
Soft wood for carving - this is what you should pay attention to
- Soft wood can be worked better when carving than hard wood, a property that can be very important, especially for carving beginners with little experience.
- A suitable soft type of wood is mainly linden, a wood that is also suitable for beginners who use a pocket knife want to carve your first figures or are not yet proficient in using a carving tool, a good choice represents. Linden is therefore the ideal wood for beginners.
- The wood from apple and pear (felled trees from the orchards) was also used for carving in earlier years used, but is sometimes very expensive today and not necessarily a due to its higher hardness Beginner wood.
- Balsa wood can also be used for delicate and particularly light carvings, for example in aircraft construction or for the wings of the Christmas pyramids. However, balsa wood is relatively expensive.
- Wood for carving, whether soft or rather hard like oak and walnut, should also have a very homogeneous structure and grain so that it does not splinter or fray during the carving work.
- With soft wood you naturally have the problem that the carved objects are only partially weatherproof, so they should be impregnated and glazed after processing.
Carve a braid - that's how it works
Carving is the model-like processing of a piece of wood that takes time and ...
- Conclusion: Get advice on the objects that you want to carve in a specialist wood shop or (for smaller quantities) in a craft shop and show you some sample wood. The choice of wood depends crucially on what you want to carve and where your carving should ultimately be, i.e. what weather conditions it is exposed to.
- And one more suggestion: Perhaps there is a course at your community college or similar institution in which beginners can learn to carve wood. There you are not only taught about the individual types of wood, but can also learn different carving techniques with the right tools (which, by the way, are by no means inexpensive).
How helpful do you find this article?
