Build bunk beds for the children's room

You can build your bunk beds for the children's room very well yourself, then you can make one Make construction from high-quality solid wood, so that your child is of consistent quality from an early age is surrounded.

What is a bunk bed actually?

• Quite earlier, a bunk bed was understood to mean a bed that was actually built into a bunk in the wall.
• Today, a bunk bed sometimes stands for a bed with a very high headboard and footboard in which the child feels safe sleeps in a bunk (with such beds, of course, a grid can easily be attached to the sides).
• Sometimes a bunk bed is also understood as a bed with bunkers, and the term is often used as well simply used for any storage bed, although that has little to do with the origin of the bunk beds Has.
• Perhaps one could summarize the feeling of living that a bunk bed should convey as follows: A bunk bed should give the child the feeling of security in his or her own Provide a place to sleep, it should give the impression of solidity and durability and it should perhaps also provide storage space, under the lying surface or on the Pages.
  instagram viewer


Build a loft bed yourself - this is how it works

In small rooms and spaces, creative solutions have to be found on how to ...

What size a bunk bed should get for the children's room

1. If you already get real, solid and good construction timber, you should make a construction that can accompany your child through the entire youth.
2. The basic construction of the bed or the frame construction should therefore be a bit larger, e.g. B. with an inner surface of 2 x 1 meters, the construction plan is described below.
3. If you also pay attention to the heavy quality of the metal parts, whether angles or screws, you can redesign your bed at any time.
4. The bunk bed, next to which there is a changing table in the frame construction, will later become a real youth bed.
5. And you might even think about choosing the wooden stands so long that you can later put the bed on them Lay the upper level and a desk combination in the lower area of ​​the frame construction build in.

So you can build the bunk beds for the nursery

1. The openness of the term bunk bed means that you can build your bed exactly according to the needs of your family, for example create an individual construction plan based on the following suggestions:
2. This bunk bed is given a basic construction of four beams, which are at the height of the lying surface below and at the top of the beams connected by four additional bars, which are attached in the gaps, as a frame and thus to form a rectangle will.
3. To do this, you screw eight angles on the inside of your stand beams at the level of the lying surface, on which the connecting beams are now placed and screwed from below. So you can join the head side and foot side while lying down (measure precisely). You will then need helping hands to join the whole thing into a rectangle.
4. You can then insert the upper inner beams, which give the construction its stability, almost by yourself. Depending on the height of the wooden stand chosen, only someone should hold the ladder. You can choose moderately high wooden stands, which turn this bed into a real, cozy bunk bed with a panel each on the head and foot side. You can also make the rectangular cube construction so high that the upper frame can be used to make a four-poster bed out of the bed.
5. If you choose the standing beams 10 x 10 cm and the inner beams twice 2 meters by twice 1 meter, you get an inner lying area of ​​2 x 1 meter. Which you don't need in full size for a smaller child, you could add another bar in the lower third of the lying surface put in between so that a smaller lying surface is created, you can now screw the wooden supports that you need for your Need slatted frame.
6. You can use the remaining space at the foot end, for example. B. Use it to put a changing table in (or to fit it in yourself, based on the very logical Even an inexperienced hobbyist will know how to design such an installation can).
7. The installation at the foot end is removed again later. You also remove the wooden supports for the smaller slatted frame and insert new ones, which now accommodate the slatted frame of a real 2x1 meter mattress that your child uses in their youth spends (this is a large bed for a child, but you can change the dimensions as you wish, with such a description of the construction plan you can best understand the construct introduce).
8. You can also choose how large you want the storage space under the bed to be based on the height of the lying surface. You can buy prefabricated drawers or equip your bed with custom-fit roller boxes.

The dimensions of this construction plan for bunk beds can be adapted to any room size. You can also use it to build a bed that can be rebuilt over and over again and can therefore accompany your child until they leave your house.