Topping-out crown: Building instructions with creative tips that will suit the builders
It's finally done. The shell of your house is in place and the roof structure has been erected. Now all that's missing is the topping-out crown and then we can celebrate. With the right assembly instructions, you can also build the topping-out crown yourself.
What you need:
- Wire frame
- 4 wire hangers
- Binding wire
- straw
- Colorful ribbons
- Decoration material
- line
Of the shell is finished and the roof structure is in place. Now comes the topping-out ceremony, which the client equips and thanks all the craftsmen and helpers.
Preparation of the topping-out ceremony
- A topping-out crown or wreath belongs to a proper topping-out ceremony. The erection of a topping-out crown when the roof structure is in place is a thank you to all workers who helped build the shell and the roof structure.
- You can buy both for a lot of money, but you can also build them yourself with a little skill and thus save a lot of money. In addition, something that you have made yourself is always more popular.
- And if there are also building instructions for a topping-out crown, then it is no problem for you either. So go ahead. Get the materials for the topping-out crown and you're good to go.
Instructions for a topping-out crown
- Take the wire frame and the four wire brackets and place them on the frame. Tie it quite tightly with binding wire and in the end it will look like a crown.
- Now put straw around the wire frame and tie it with binding wire. If you do this bit by bit, it will be easier to get the straw firmly in place.
- When the whole wire frame is ready, you can now wrap the wire hangers tightly with pine green.
- Then the decorating can begin. Take a lot of colored ribbons, which are approx. 60cm long and tie them to the wreath so that they can blow nicely in the wind.
- You can also attach things that can somehow be associated with the client. That is entirely up to you.
- When the wreath is finished, attach two more cords to the topping-out crown so that it can then also be hung up. With these assembly instructions, your topping-out crown should be successful.
- But always remember: The builder himself is not allowed to attach this topping-out crown, it brings bad luck.
Make a topping-out wreath yourself
A topping-out wreath should of course not be missing at a topping-out ceremony. If you yourself ...
How helpful do you find this article?
