Glued wood panel - quality and correct processing are important
A laminated wood panel doesn't just smell of wood. This plate material is also made of solid wood. Wooden strips are glued together, creating wide areas for optimal cutting. The advantage is that the glued wood panel is less twisted than a solid wood board and is less prone to cracking. However, it remains a natural material that is subject to environmental influences, works and is alive.
Check the quality of the glued wood panel
Before buying a glue-laminated board, it is good to familiarize yourself with the different manufacturing methods.
- The difference with a glued wood panel lies in the processing of the lamellae. With continuous lamellas along the entire length of the panel, the result is a calmer wood appearance. This type of processing can be more expensive and the panels are rarely longer than 300 cm. If you want to build a cabinet where that wood If you want to look natural, this glued wood panel is ideal.
- The second variant is the glued wood panel with finger-jointed lamellas. This means that the individual bars are also finger-jointed in length. This picture of the wood grain is more troubled. If you later want to paint the cabinet with paint anyway, this "rectangular look" would be covered, unless you want to consciously use this look.
- The hardware store offers small, handy glued wood panels compared to the timber trade. Mainly spruce, pine and beech are available in various widths and lengths.
- The processing of a glued wood board is comparable to a simple wooden board. You have to ribbons pay attention to the grain direction. When processed, the pine wood has shorter fibers than the spruce.
- A glued wood panel can also have knots depending on the quality classification.
- When choosing in the hardware store, you should check the longitudinal alignment of each board and not buy boards with warped ones. The neat gluing of the individual lamellas is also important. Do not use open joint areas either.
- A glued wood panel that is not welded in foil can be better checked for wood quality.
- If you find out about the respective dimensions before buying the glued wood panel, you can Prepare a cutting list in advance according to your project and the material consumption optimize.
Wood panels is a generic term that requires a further distinction. The species …
Process a glued wood panel like a wooden board
If you record your respective parts for the planned furniture construction, you can treat a glued wood panel like a wooden board.
- You can easily saw, dowel, glue and sand. You only have to pay attention to the grain.
- If you have the glued wood panel with oils, waxes or matt or If you work on gloss varnish, the color of the wood intensifies and the grain emerges decoratively.
- A glued wood board, like a wooden board, must always be surface treated on both sides so that no tension occurs. A varnish is often sufficient inside if you have applied paint on the outside.
- According to the manufacturer, the glued wood panel should not be suitable for cabinet doors. This would then not be attached on all sides and can warp. You can solve the problem with a wooden frame made of strip material behind the plate.
- For kitchen and bathroom, special demands are made on the surface of the glued wood panel due to moisture and water vapor. Only a very good varnish seal can help. Let the specialist store advise you on your choice.
- Only waterproof glued laminated wood panels, which you can purchase from special dealers, are suitable for outdoor use.
How helpful do you find this article?
