Find a leak in the pool

instagram viewer

If your pool loses excess water in addition to normal evaporation, it can be assumed that there is a leak in the pool. In order to repair the damage and to avoid further damage, the hole from which the water leaks should be found quickly and plugged with suitable means.

A leak in the pool should be found quickly for uninterrupted bathing fun.
A leak in the pool should be found quickly for uninterrupted bathing fun.

What you need:

  • Repair kit
  • Repair pieces
  • cleaning supplies
  • Wipe
  • water

Detect a leak in the pool

In the event that you lose an unusually large amount of water from your pool and you have no further explanation, in the event of a leak, you should fix it quickly.

You don't have to drain all of the water out of the pool to repair the damage.

  • Choose a sunny or at least warm day to repair the leak in your pool. Since the search is a bit of a hassle, you will save yourself the cold and a cold.

  • Walk carefully down the pool floor. You can quickly spot bumps and cracks with your feet. Dirty spots can also be an indication that water is leaking at this point.

Find and repair a hole in the pelvic floor

  1. Remove the leak from Seaweed and dirt. Skin care products can also leave a greasy film on the pelvic floor of the leak. You can find suitable pool cleaning accessories in specialist shops. Use this according to the manufacturer's instructions. The necessary repair kit is also available from specialist pool shops.

    2. Pool - Find and repair a hole in the floor

    A pool can be found in many gardens. They are used for refreshment on warm ...

  2. Cut out a large patch from the repair kit. Make sure that the piece is larger than the crack or leak so that no water can escape from the side. Cut the edge at least 4 inches larger than the circumference of the leak to completely seal the hole.

  3. Attach the patch on the leak. The edges of the patch should also lie completely flat on the pelvic floor without blisters. This is the only way to ensure that the leak is completely sealed. You can also use waterproof, heavy material to weigh the patch down. If you find an air bubble or bump, smooth it out.

  4. After about an hour, remove anything that has weighed down the patch. Despite the leak that you have sealed, your pool is now suitable for swimming again without losing water.

How helpful do you find this article?

click fraud protection