The bathroom is too damp

instagram viewer

It is in the nature of things that a bathroom is a little damp. But if a bathroom is too damp, then you need to take remedial action. Too much moisture is harmful to the indoor climate and promotes the formation of mold, which is harmful to health.

What can you do about a too humid bath?
What can you do about a too humid bath?

What you need:

  • Dish brush
  • hand towel
  • screwdriver

Bathroom is too damp - find out why

  • There are many reasons a bathroom can be too damp. In order to remedy the wetness, you must first find out where the cause is coming from.
  • Room ventilation is an absolute necessity in bathrooms. In the case of windowless bathrooms, so-called Berlin shafts are usually installed in older buildings. It is a kind of fireplace. There are two ventilation screens on the wall where the Berlin shaft runs. One very close to the floor and one very close to the ceiling. These shafts must be freely accessible and must under no circumstances be blocked by furniture, pictures or the like. The slats of the manhole covers must also be cleaned regularly. Due to the draft, the slats of the manhole cover are clogged with dust and can no longer transport the moist air away.
  • In newer residential units, electric ventilation is installed in windowless bathrooms. However, these only work properly if they are regularly serviced and cared for. There are fleece inlays in the ventilation, which must be removed and washed thoroughly at least four times a year. If the inserts in the vents are clogged with dust deposits, they cannot humidity haul away more.

Cleaning the ventilation screens of the Berlin shaft

  1. Unscrew the screens. Clean the sieves with a dish brush under running water.
  2. dry Thoroughly clean the sieves. Screw the screens back on.
    3. Correctly installing ventilation in the bathroom - what to look out for

    Ventilation is very useful in the bathroom, not only to direct odors outside, ...

Cleaning electrical air filters in the bathroom

  1. Unscrew the air filter. Remove the filter fleece. To wash Thoroughly remove the fleece.
  2. Dry the fleece on the heater or in the sun.
  3. Wash the frame thoroughly. Thoroughly dry the frame.
  4. Put the fleece back in place. Screw the frame back on.

If you bath If it is still too damp, then it is not up to you, but rather to the fabric of the building. In that case, inform your landlord of the circumstances or call a specialist.

How helpful do you find this article?

click fraud protection