Find and repair a hole in the paddling pool
Finding a hole in the paddling pool seems like a mammoth task at first glance. Do you find it just as difficult to find a needle in a haystack? Don't panic - this is how it works.
Find the hole in the paddling pool quickly
The fastest way to find the hole in the paddling pool is using this ancient method for all inflatable objects.
- Transfer the water from the paddling pool to a plastic tub so that you can move the paddling pool easily. In any case, leave the remaining air in the rings. If only one ring has become thinner, then you can assume that a hole can only be found in this ring of the paddling pool.
- Take a felt pen to mark on the paddling pool. A waterproof pen would be ideal, but you can also use a normal felt-tip pen.
- Now pull the edge of the paddling pool, which is still inflated, through the water in the plastic tub. Where the hole is, air bubbles will rise from the escaping air in the paddling pool ring.
- Mark the spot, but still search around the ring so that you do not miss a possible further hole. If you should find another hole, you have to mark that too. This is the only way to repair everything.
Glue Easy Pool - repair a hole in the air ring
A hole in the air ring of the Easy Pool does not have to mean its end. You can do that ...
Repair the hole in the paddling pool
When the hole in the paddling pool is found, it continues like this:
- Now put the paddling pool, still with the hole, in the sun to dry.
- When it dries, rub the perforated areas dry with a clean, dry towel.
- Then roughen the holes in the paddling pool a little with the very fine sandpaper. Roughening makes the glue stick better to the patch. Feel free to roughen a little more area than the patch will cover, because then the edges of the patch will hold better.
- After roughening, wipe the holes again with the clean, dry towel to remove dust particles.
- Now apply the glue from the patch set and spread it thinly on the roughened surface.
- Then pull the film off the patch and press it firmly onto the hole so that the hole in the paddling pool is centered under the patch.
- So that the patch really comes into contact with the paddling pool with its entire surface, you should find something to weigh down and place it on the patch.
- Now everything can dry in peace. Allow sufficient time for the material to bond. After a good hour everything should be dry and the hole in the paddling pool has been repaired.
Now you can relax and enjoy the summer, because you now know how to find a hole in the paddling pool and can comfort and calm your little ones quickly. Good succeed!
