VIDEO: Threading the thread on a sewing machine

Preparing the sewing machine for new thread

1. First insert the machine plug into the sewing machine and then the power plug into the socket.
2. Press the toggle switch and use it to switch the sewing machine on so that you can thread a new thread.
3. Position the foot pedal so that you can easily reach it with your foot.

Thread the sewing thread for the bobbin

1. Switch off the sewing unit to be able to thread the sewing thread for the bobbin. This is usually done using a knob on the handwheel of the sewing machine, which must be turned counterclockwise.
2. Wrap the thread around the bobbin several times, place it on the bobbin winder spindle and press the stop head of the bobbin winder against the bobbin.


Necchi 559 - a manual for the sewing machine

The Necchi 559 is a very robust and easy to use sewing machine. In the …

3. Guide the thread counterclockwise over the winder pre-tensioner and place the thread spool on the spool holder.
4. Press down the sewing machine foot pedal and wind the thread evenly on the bobbin.
instagram viewer
5. Remove the bobbin and cut the thread from the spool of thread. Activate the sewing unit by tightening the knob on the handwheel. Make sure that the sewing needle is on top so that you do not disturb you when inserting the bobbin case.
6. Place the bobbin in the bobbin case and pass the thread through the insertion slot. Pull the thread under the capsule spring.
7. Lift the bobbin clip and insert the bobbin into the machine with the opening facing up. You can hear the clicking sound.

Thread the thread into the sewing machine and pull up the bobbin thread

1. Place the spool of thread on the spool holder so that you can thread the thread on the sewing machine.
2. Feed the end of the thread first through the thread guides, then between the discs of the upper thread tensioner, and then through the thread guide lever.
3. Thread the thread through the eye of the needle from front to back and hold the end with your left hand.
4. Turn the handwheel until the sewing needle is at the highest point again. Gently pull the upper thread and use it to feed the bobbin thread up through the sewing hole.
5. Place the bobbin thread and the upper thread behind the presser foot.

After threading the thread on the sewing machine, you can place the fabric under the presser foot, fold down the presser foot lifter and use the sew kick off.